Replacement and Wear Parts - Pepco Plastics Ltd.

Services

Call (780) 414-1590

Need more information?
Give us a call

Industries

Agricultural

Marine

Oil & Gas

Electrical

Waste Water

Chemical

Mining

Pulp Mill

Forestry

Food & Beverage

Pharmaceutical

Military Defence

Contact Us

Plastic Stock Supply Services in Nisku, Alberta

Plastic stock supply is the problem every fabrication shop or metal-focused machine shop eventually runs into: a customer needs a plastic component and you don't stock the material. You either turn the work away, chase a distributor minimum order for more material than you need, or call a supplier who doesn't actually understand what you're asking for.

Pepco Plastics is a plastic stock supplier built for fabrication shops. We stock engineering plastic sheet, rod, and block in the materials your customers actually specify, UHMW, HDPE, Nylon, Delrin, and Tivar, and we supply to shops that need a dependable source without the minimum-order friction of a national distributor.

If you need plastic to finish the job, contact Pepco.

Custom Plastic Manufacturing - Pepco Plastics

The Problem for Metal-Focused Fabrication Shops

Metal fabrication shops are set up for steel and aluminum. Your tooling, your stock, your supplier relationships — they're all built around metal. When a customer comes in with a plastic component requirement, it doesn't fit the workflow cleanly.

National plastic distributors have minimums that don't work for a shop that needs one sheet of UHMW to finish a job. Industrial supply catalogues carry commodity plastic but rarely the engineering grades that wear applications require. And sourcing engineering plastics you don't stock regularly means lead times that can push out a job that should have been a quick turn.

The result is that metal shops often decline or delay plastic work — not because they can't machine it, but because the supply chain doesn't work for them.

Pepco is the answer to that supply problem.

Advantages of Pepco Plastics

Our customers typically machine or cut the products we sell or products for their own use or for resale. Pepco Plastics Ltd. manufactures and supplies state of the art materials providing our customers with solutions to eliminate shock, wear, vibration, and impact for the following applications:

Wide temperature range from -80 to 800 Fahrenheit (-62 to 427 Celsius)

Resistant to corrosion and most oils, greases, and solvents

Excellent electrical insulation

Excellent abrasion resistance

Excellent impact strength

Excellent resilience, toughness, and cut resistance

Excellent sound dampening qualities

Low coefficient of friction

What Pepco Stocks for Fabrication Shops

Pepco carries engineering plastic stock in the materials and forms most commonly specified in Western Canada's industrial fabrication work:

UHMW sheet, plate, and rod

UHMW is the standard wear plastic for high-abrasion applications. If your customer needs UHMW chute liners, wear strips, or custom wear components, Pepco has the stock. UHMW in food-grade grades is available for food-contact applications.

HDPE sheet, plate, and rod

HDPE is the corrosion-resistant, food-safe, machinable workhorse of the engineering plastic portfolio. HDPE covers chemical, marine, food-contact, and structural plastic applications. One of the most frequently requested stock materials

Nylon rod and plate

Nylon is for gears, bushings, and structural components where strength and self-lubrication are required. Nylon 6, Nylon 6/6, oil-filled, and glass-filled grades available.

Delrin (acetal) rod and plate

Delrin is for precision machined components where dimensional stability and tight tolerances are required. Standard homopolymer and copolymer grades available.

Tivar UHMW

Tivar is enhanced UHMW grades for applications where standard UHMW is not sufficient. Tivar 1000 for extreme wear; Tivar Antistatic for combustible material handling environments.

How Pepco Works With Fabrication Shops

Pepco supplies plastic stock on a straightforward basis. You send the material specification, the form (sheet, rod, plate), the dimensions you need, and the quantity. Pepco quotes and ships.

We cut to size. If you need sheet cut to specific dimensions rather than full sheet, say so — Pepco can supply cut-to-size stock as part of the order. This reduces your waste and simplifies your job setup.

We supply repeat orders. If you're running a standing arrangement with a customer that creates regular plastic material requirements, Pepco can set up a supply arrangement that matches your production schedule. No chasing a new quote every time.

We answer technical questions. If your customer isn't sure whether UHMW or HDPE is the right specification for their application, call Pepco. We'll give you a straight answer on material selection so you can quote your customer with confidence.

How to Engage Pepco as a Supply Partner

Getting set up as a Pepco supply customer is straightforward. Contact Pepco with your material requirements — what you stock regularly, what you need cut to size, and any applications you're currently declining because you don't have the plastic supply chain to support them. We'll talk through what Pepco can supply and how the arrangement works.

For one-off requirements, just send the specification and quantity and Pepco will quote it. You don't need to be a standing customer to get a quote.

Request a Quote

Materials and Applications

Pepco's plastic stock covers the full range of engineering plastic applications that fabrication shops encounter:

- High-abrasion wear parts: UHMW and Tivar — chute liners, conveyor wear strips, guide rails, hopper liners
- Corrosion-resistant components: HDPE — chemical handling, marine, waste water, food-contact structural parts
- Precision machined components: Delrin — gears, bushings, electrical insulators, precision mechanical parts
- Load-bearing structural components: Nylon — gears, sprockets, drive components, structural bushings

If the application is industrial and the specification calls for engineering plastic, Pepco likely has the material in stock.

Why Choose Pepco?

At Pepco Plastics, we combine decades of hands-on experience with rigorous quality control to deliver custom plastic parts you can rely on. Our in-house facility in Nisku, Alberta is equipped with the machinery, testing equipment, and skilled team needed to meet your exact specifications, every time. Here's what sets us apart:

Fast, Accurate Quotes

Send us your drawings or specs and we'll get back to you quickly with clear, upfront pricing, lead times, and recommended processes, so you can make decisions with confidence.

Full In-House Capabilities

From CNC machining to injection and compression molding, our Nisku facility handles it all under one roof. That means faster turnaround, tighter quality control, and one point of contact for your entire project.

Quick Turnaround, Every Time

With our own equipment and an experienced production team, we move quickly from prototype to full production, without sacrificing quality or precision.

Reliable Quality You Can Count On

Every part we produce goes through careful quality checks to ensure it meets your specifications. Our goal is simple: deliver parts that perform, on time, every time.

Long-Term Partnerships Built on Trust

We're not just looking for one-off orders, we want to be your go-to plastic manufacturing partner. Our commitment to quality and service is why so many of our clients keep coming back.

50+ Years of Industry Experience

Our team has spent decades perfecting custom injection molding, compression molding, and plastic fabrication. That experience means fewer surprises, smarter problem-solving, and parts built right the first time.

Available Materials

We work with a wide range of high-performance plastic materials and maintain ample stock across multiple grades and varieties. Every material comes with a quality inspection certificate for full traceability.

UHMW

HDPE

Delrin

Nylon

Tivar

Need something else?

Frequently Asked Questions

Pepco works with fabrication shops on orders sized for the job, not sized for a distributor's minimum.

Yes. Cut-to-size plastic sheet is available. If you need UHMW or HDPE sheet cut to specific dimensions rather than ordering a full sheet, Pepco can cut to your specified dimensions. Provide the sheet size, thickness, material, and quantity at inquiry.

Yes. Food-grade UHMW and HDPE are available for food-contact applications. If your customer's application requires food-contact-compliant plastic, specify the requirement at inquiry. Material certificates of compliance for food-contact grades are available on request.

For cut-to-size and standard stock items, lead times are generally shorter than for machined components.

Yes. Plastic stock supply is a separate service from Pepco's custom machining. If your shop does the machining and you just need the material, Pepco can supply sheet, rod, or plate stock in the grade and dimensions you specify.

If your shop regularly turns away or delays plastic work because the supply chain doesn't work, contact Pepco. Describe what you're trying to source and how often you need it — start the conversation here.

Plastic Stock Supply for Industrial Components